eSUN High Speed Upgraded PETG Filament 1.75mm, High Toughness 3D Printer Filament Speedy PETG for Fast Printing, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Solid Red

What is eSUN High Speed PETG Material? PETG (Polyethylene Terephthalate Glycol-Modified) is a rigid, tough, high performance material. It has the advantages of high toughness and good mechanical properties (like ABS), also has the characteristics of ease to print and minimum warping (like PLA). Designed for high speed printers. Fast cooling with high speed printing and comes out with high printing quality. Continues consistently outstanding performance at high speeds. Optimizing the problem of nozzle adhesion during printing and reduce the printing failure.Available Colors:Solid Black, Solid Grey, Solid Silver, Solid Green,Solid Blue, Solid Yellow, Fire Engine Red, Solid Orange, Solid White, Solid RedRecommended Printing Parameters: Printing Temperature: 220-260℃ (Recommended 240℃) Bed Temperature: 75-90°C Fan Speed: 100% Printing Speed: 40-300mm/s Recommended Heated Build Platform: Textured Paper, PVP Solid GlueHow to Storage:1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.Please Notice: PETG material is easily stringing after absorbing water, it will be better drying at 65℃ for more than 3 hours before printing. The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.

• 【High Speed PETG Filament】Combines the advantages of PLA and ABS, eSUN high speed PETG has the advantages of high toughness and good mechanical properties (like ABS), also has the characteristics of ease to print and minimum warping (like PLA). Good Impact Resistance. Weather Resistance. Chemical Resistance. Good Stability.
• 【High Speed Printing & High Compatibility】Designed for high speed printers. Fast cooling with high speed printing. Continues consistently outstanding performance at high speeds. Compatible with Bambu Lab X1 / X1C / P1P ,Creality K1 / K1 Max and AnkerMake M5. Widely used in waterproof application, snap-fit, flower pot, equipment shell, etc.
• 【High Printing Successful Rate】Optimizing the problem of nozzle adhesion during printing and reduce the printing failure. Good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.
• 【Tangle Free & No Plugging】Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder. Stable dimensional tolerance.
• 【Vacuumed Sealed Packaging】Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.