Simpson IUS2.56/14 I-Joist Hanger — Residential Use, Standard Application

IUS2.56/14 I-Joist Hanger IUS/MIU I-Joist Hangers The improved IUS is now fully compatible with shallow flange I-joists! I-joists with flange thicknesses between 1 1/8" and 1 1/2" achieve the full allowable table loads including uplift values and joist nails are not required! The IUS is a hybrid hanger that incorporates the advantages of the face mount and top mount hanger. Installation is fast with the Strong-Grip seat, easy-to-reach face nail locations and self-jigging locator tabs. The MIU series hangers are designed for commercial and high load I-joist applications without requiring web stiffeners. The MIU features Positive Angle Nailing PAN, which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Refer to Joist Manufacturer's literature or appropriate Simpson Strong-Tie Connector Selection Guide for actual joist sizes. Material: See Face Mount Hanger tables. Finish: Galvanized Uplift Loads: Models have optional triangle joist nail holes for additional uplift. Properly attached web stiffeners are required. MIUadd four additional 10dx1 1/2" joist nails for a total uplift load of 975 lbs. IUSadd web fillers and two 10dx1 1/2" joist nails in the triangle holes for a total uplift of 365 lbs

• PRODUCT IDENTIFICATION: Simpson general — sourced direct from the manufacturer or authorized distributor. Designed for standard US residential install conditions across remodel, new-construction, and individual fixture replacement work.
• GENERAL INSTALLATION: Designed for standard US residential use — applied or installed per the manufacturer's directions on the labeled surfaces or substrates. Built to meet common US residential install specs across new-construction and replacement work.
• STANDARD RESIDENTIAL SPEC: Built to standard residential install specs — drop-in compatible for new-construction and replacement work across the labeled application range. Universal industry-standard interfaces. Designed for standard US residential install conditions across remodel, new-construction, and individual fixture replacement work.
• SIMPSON BRAND: Part of the Simpson residential product line — backed by manufacturer support and warranty terms as specified by the brand. Sourced direct from the manufacturer or authorized distributor. Designed for standard US residential install conditions across remodel, new-construction, and individual fixture replacement work.
• RESIDENTIAL & COMMERCIAL USE: Designed for standard US residential and light-commercial install conditions across new-construction, full remodel, and individual unit replacement work. Pairs with matching same-brand accessory items where applicable.